Ludlum Measurements 4525 GENERATION IV Series, Installation Manual

Page: 12 / 77

Model 4525 Generation IV Series Installation Manual
Section 2
Ludlum Measurements, Inc. Page 2-4 December 2020
C
RATE
C
ONTENTS OF THE
M
ODEL
4525-12500
WITHOUT STANDS
The system is shipped in two crates.
The first crate contains: Detector 1 and Detector 2 and peripherals.

Two large (approximately 116.8 x 116.8 x 22.9 cm {46 in x 46 in x 9 in.}) white
detector boxes labeled Detector 1 and Detector 2

One 30.5 m (100 ft) roll of cable for the detectors (Belden 8774 or equivalent)

One 76.2 m (250 ft) roll of CAT-5E cable for Ethernet connection (Belden 1501A
or equivalent)

One remote display with 30.5 m (100 ft) cable (Belden 9946 or equivalent)

Four infrared sensor components with conduit

One hardware mounting kit containing the following:

20 qty. ½-inch x 2 ¼-inch long hex bolts

20 qty. ½-inch hex nuts

20 qty. ½-inch lock washers

40 qty. ½-inch flat washers

If a computer is purchased with the system, it will be inside the crate.

Any other optional items will be packed in the crate with the detectors.

One crate is approximately 681 kg (1500 lb), and the other is approximately 908 kg
(2000 lb).
The second crate contains: Detector 3 and Detector 4 and Detector 5.

Three large (approximately 116.8 x 116.8 x 22.9 cm {46 in x 46 in x 9 in.}) white
detector boxes labeled Detector 3, 4 and 5.