64
APPENDIX A. AUXILIARY COMMUNICATIONS
Enable:
If the
α
−
β
button and MODE buttons are both held for longer than 1 second (1
beep), the AuxCom port will toggle on and off each time this is done. Off or On will appear
on the screen to indicate the current AuxCom state.
,
The pairing PIN is only used for SLURM.
A.3.2 AuxCom Usage - Pairing
“Pairing” is the process to connect an instrument with a mobile device. It helps verify you are
connecting to the correct device, as well as configures the encryption. The pairing process
should only be done when both the instrument and mobile device are ready. Ensure the App
or software is installed, and then follow these steps:
1. Open connection window in App/Software.
2. Use 2-second PIN hot key to get PIN.
3. Use 2-second PIN hot key to clear screen.
4. Use 2-second Enable hot key to turn on WiFi.
5. Select “Scan” in App/Software.
6. When instrument is found by mobile device, select device in list and then “Pair.”
7. Enter PIN in App/Software from Step 2.
Ludlum Measurements, Inc.
