L
IST OF
F
IGURES
2.1
Startup Display (All Segments Shown) . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2
Firmware Version Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3
Battery Voltage Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.4
Startup Display Showing 189 Stored Data Records . . . . . . . . . . . . . . . . . . .
2.5
Detector Loss of Count Display-Alpha (Display Will Flash) . . . . . . . . . . . . . .
2.6
Detector Over Range-Alpha (Display Will Flash) . . . . . . . . . . . . . . . . . . . .
2.7
Detector Overload Alarm (Display Will Flash) . . . . . . . . . . . . . . . . . . . . . .
2.8
RATE Mode Displaying Background Radiation Rate . . . . . . . . . . . . . . . . . .
2.9
MAX Mode Display With ALARM Indication . . . . . . . . . . . . . . . . . . . . . . .
2.10 COUNT Mode Displaying COUNT Timer of 5 Minutes, 30 Seconds . . . . . . . . .
4.1
Setup Page Selection Display (showing page 4-CAL) . . . . . . . . . . . . . . . . . .
5.1
Displaying Datalog Table Index of 12 . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2
Displaying Datalog Location ID Table Index of 36 . . . . . . . . . . . . . . . . . . . .
A.1
Example – Device Selection In Lumic Linker App (iOS) . . . . . . . . . . . . . . . .
A.2
Example – Pairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A.3
Example – Model 3000 series Found in Lumic Linker App (iOS) . . . . . . . . . . . .
A.4
Example – Entering PIN In Lumic Linker App (iOS) . . . . . . . . . . . . . . . . . . .
A.5
Example – Lumic 2.0 Calibration Software . . . . . . . . . . . . . . . . . . . . . . . .
5
