52
28
2
1
1
2
UTILITY STITCHES
Bar tack stitch
Bar tack stitch is used to reinforce points subject to strain, such
as pocket corners and openings.
Using the all purpose foot.
Extend the button holder plate and set to the desire bar tack length.
Adjust the stitch width and the stitch length to the desired width and
density.
Attach the buttonhole foot. The thread should be passed through the
hole in the presser foot, then be placed under the foot.
Position the fabric so that the needle is 2mm in front of where you
want the sewing to start, and then lower the presser foot.
- 2mm Starting (1)
- Point (2)
Pull the buttonhole lever all the way down and position it behind the
bracket on the buttonhole foot..
- Buttonhole lever (1)
- Bracket (2)
Slightly hold the end of the upper thread and start sewing. Bar tack
stitches are sewn.
Note:
It is suggested that you sew with a stabilizer material under the
fabric.
