VIA693/693A 35
2.
Make sure power is off during assembly.
3.
Insert the RMAMs through the bottom of the motherboard and attach them to
the retention mechanism.
4.
Fasten up the screws on the retention mechanism to tighten up retenion
mechanism and RMAM. Check if all the piece parts are fastened tightly.
5.
Put the CPU in the RM kit. (Push the CPU horizontally into the RM kit.)
Due to different packages of “Katmai™ , Celeron™ , SECC-II, Klamath™ and
Deschutes™ , there are 2 positions to lock them in the RM kit. Below is ntoice to
unlock those CPUs.
Lock for Klamath &
Katmai
***Klamath™ & Katmai™ : push the switch
on the CPU, and CPU will be loosen from the
lock of RM kit.
