3.2.2.2. For optimum results, it is recommended that
you use the appliance on dry hair, as it is much easier
to control the hair and the result.
3.2.2.3. Hold the appliance in a calm and relaxed man-
ner in order to ensure maximum control of the cut and
a uniform result. Proceed to used short cuts gradually
going around the head.
3.2.2.4. Leave the hair a little longer than the desired
length as it can always be altered later.
3.2.2.5. While working, adapt the comb / comb guide
to achieve the desired result.
3.2.2.6. At regular intervals, stop cutting in order to
comb the hair and check the results so far.
3.2.3 Nape:
3.2.3.1. Attach comb guide size: 3mm - 6mm.
3.2.3.2. Hold the appliance with the razor facing
downwards and begin to cut the hair from the base of
the neck.
3.2.3.3.Make some upward movements, raising the
appliance gradually and away from the head, cutting
the hair gradually until the height of the ears (Fig. 3)
3.2.4 The back of the head:
3.2.4.1. Attach comb guide size 9-12mm and continue
with the back of the head (Fig 4)
3.2.5 The side of the head:
3.2.5.1. Attach comb guide size: 3mm - 6mm to trim
the sideburns.
3.2.5.2. Attach the longest comb guide size
9mm/12mm again and continue until you reach the top
of the head.
3.2.6 The top of the head:
3.2.6.1. Attach comb guide size 9mm or 12mm, pass
the appliance from the back to the front, against the
growth of the hair (Fig 5). In some cases it’s necessary
to go over what you have done a second time from
front to back.
3.2.6.2. Attach comb guide size 3mm or 6mm when
you want to achieve a more precise cut.
- Use comb guides size 12-15mm to leave hair at a
longer length. Hold the hair up with the comb or the
comb and your fingers and cut.
3.2.6.3. Always work from the back to the front reduc-
ing the length between your fingers or the comb and
the head gradually.
3.2.7 The final touch:
3.2.7.1. Finally use the appliance without attaching any
comb guides to the blades to cut the hair around
the base of the neck, the sides of the neck and
the ears.
3.2.7.2. To make the sideburns straight, turn the appli-
ance over to use the upper blades (Fig 6). Move the
appliance adapting it the physiognomy of the
head.
