background image

3.3 Once you have finished using the appliance:

3.3.1. Allow appliance to cool down.
3.3.2. Unplug the appliance from the mains power 
supply.
3.3.3. Clean the appliance as described in the cleaning 
section.
3.3.4. Put the protective cover back on.

4. Cleaning

4.1. Disconnect the appliance from the mains power 
supply and allow it to cool completely before undertak-
ing any cleaning task.
4.2. Clean the outer parts of the appliance with a damp 
cloth with a few drops of washing-up liquid and then 
dry. CAUTION! Do not immerse electrical parts of the 
appliance in any liquid.
4.3. Do not use solvents, or products with an acid 
or base pH such as bleach, or abrasive products, for 
cleaning the appliance.
4.4. Never submerge the appliance in water or any 
other liquid or place it under running water.
4.5. During the cleaning process, take special care with 
the blades, as they are very sharp.
4.6. Clean the blades and the comb guides with the 
cleaning brush. Remove the hairs from the blades and 
from inside the appliance with the brush. It is important 
to clean off remaining hairs after each use.

5. Anomalies and repair

5.1. Take the appliance to an authorised support centre 
if product is damaged or other problems arise.
5.2. If the connection to the mains has been damaged, 
it must be replaced and you should proceed as you 
would in the case of damage.

-

 This symbol signifies that the appliance must not be 

used near water

This appliance complies with Directive 2006/95/EC on 
Low Voltage and Directive 2004/108/EC on Electro-
magnetic Compatibility.

Reviews: