2.2.4. This appliance is not intended for use by
persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance by
a person responsible for their safety.
2.2.5. This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
2.3. Use and care:
2.3.1. Fully unroll the appliance’s power cable before
each use.
2.3.2. Do not use the appliance if the parts or acces-
sories are not properly fitted.
2.3.3. Unplug the appliance from the mains power
supply when not in use and before undertaking any
cleaning task.
2.3.4. This appliance should be stored out of reach
of children.
2.3.5. Do not store the appliance if it is still on/hot.
2.3.6. Never leave the appliance unattended when in
use and keep out of the reach of children.
2.3.7. If, for some reason, the appliance were to catch
fire, disconnect the appliance from the mains power
supply and DO NOT USE WATER TO PUT THE FIRE
OUT.
2.4. Service:
2.4.1. Make sure that the appliance is serviced only
by suitably qualified technician, and that only original
spare parts or accessories are used to replace existing
parts/accessories.
2.4.2. If the power cord is damaged, the manufacturer
or its service agent or a similarly qualified person must
replace it in order to avoid a hazard.
2.4.3. Any misuse or failure to follow the instructions
for use renders the guarantee and the manufacturer’s
liability null and void.
3. Instructions for use
3.1. Before use:
3.1.1. Remove the appliance’s protective film(if ap-
plicable).
3.1.2. Before using the product for the first time, clean
the parts that will come into contact with your head in
the manner described in the cleaning section.
3.2.1 Use and care
:
Using the appliance:
3.2.1.1. Unroll the cable completely before plugging it
in.
3.2.1.2. Connect the appliance to the mains.
3.2.1.3. Remove the protective lid (Fig 1)
3.2.1.4. Make sure that the blades are correctly al-
ligned.
3.2.1.5. To attach a comb guide, pick it up by its two
tips and press it against the blades of the appliance un-
till it is firmly fixed. To remove it, just pull it out (Fig 2)
3.2.1.6. Turn the appliance on using the on/off switch.
3.2.1.7. You can restart the appliance using the switch,
but only once the control device has cooled. If it is has
not restarted, do not force it and leave it to cool.
Using the power screw:
3.2.1.8. The blade track is set to the optimum setting
in production; however, the blade track can be changed
as a result of the voltage fluctuations.
3.2.1.9. You can set this blade track if necessary, use
Summary of Contents for Master Barber Kit HCL07AC
Page 8: ......