LUCID Helios Flex Camera Technical Manual
10
Installing the Camera Hardware
Camera Installation
•
Systems must be installed and operated by trained personnel.
•
Safety warnings and procedures specified in this user manual must be observed.
Mounting
The camera is equipped with four pairs of M4 mounting holes. Each of the 4 side walls of Helios Flex is
equipped with a pair of M4 holes.
FFC Cable
•
The Helios Flex camera interfaces with the Jetson TX2 board via the 4-Lane MIPI D-PHY CSI-2
interface via an FFC cable
•
The manufacturer part number of the FFC cable that is included in the Helios Flex kit is 15021-
1233.
When using the included FFC cable, make sure the blue side is facing
toward
the locking
tab. Engage the FFC connector’s locking tab to its
horizontal
position to lock it.
