Additional Installation Instructions
WaveLAN Legacy Radio Modules
WavePOINT-II - Quick Installation Guide
C-5
Figure C-4 Connecting the Pigtail and PCMCIA Card
2.
Mount the WaveLAN Lightning Protector close to the
WavePOINT-II device.
The distance between the two items should allow sufficient
clearance to mount the WavePOINT-II cover plate, but should
not exceed the length of the pigtail cable.
3.
Connect the WaveLAN Lightning Protector to the same
grounding system as the WavePOINT-II device and the
outdoor antenna system.
!
WARNING:
The WaveLAN Lightning Protector, the outdoor antenna
system and the WavePOINT-II unit must be connected to
the same ground, using an equipotential bonding
conductor. Always consult a qualified electrician if you are
in doubt as to whether your WaveLAN outdoor antenna
system is properly grounded.
wp2_c.book Page 5 Thursday, September 23, 1999 6:24 PM
