manualshive.com logo in svg

Lucent Technologies PortMaster OR-HS, Hardware Installation Manual

Share
Download
Lucent Technologies PortMaster OR-HS Hardware Installation Manual Download Page 14

Contacting Lucent Remote Access Technical Support

xiv

PortMaster Office Router Hardware Installation Guide

Contacting Lucent Remote Access Technical Support

The PortMaster comes with a 1-year hardware warranty.

For all technical support requests, record your PortMaster ComOS version number and 
report it to the technical support staff or your 

authorized sales channel partner

.

New releases and upgrades of PortMaster software are available by anonymous FTP from 
ftp://ftp.livingston.com/pub/le/.

In North America you can schedule a 1-hour software installation appointment by 
calling the technical support telephone number listed below. Appointments must be 
scheduled at least one business day in advance.

For the EMEA Region

If you are an Internet service provider (ISP) or other end user in Europe, the Middle 
East, Africa, India, or Pakistan, contact your local Lucent Remote Access sales channel 
partner. For a list of authorized sales channel partners, see the World Wide Web at 
http://www.livingston.com/International/EMEA/distributors.html. 

If you are an authorized Lucent Remote Access sales channel partner in this region, 
contact the Lucent Remote Access EMEA Support Center Monday through Friday 
between the hours of 8 a.m. and 8 p.m. (GMT+1), excluding French public holidays.

•

By voice, dial +33-4-92-92-48-48.

•

By fax, dial +33-4-92-92-48-40.

•

By electronic mail (email) send mail to [email protected].

For North America, Latin America, and the Asia Pacific Region

Contact Lucent Remote Access Monday through Friday between the hours of 7 a.m. 
and 5 p.m. (GMT –8). 

•

By voice, dial 800-458-9966 within the United States (including Alaska and 
Hawaii), Canada, and the Caribbean, or +1-925-737-2100 from elsewhere.

•

By fax, dial +1-925-737-2110.

•

By email, send mail as follows: 

Summary of Contents for PortMaster OR-HS







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands