Lucent Technologies MERLIN LEGEND Release 7.0, System Programming Manual

Page: 833 / 1082

MERLIN LEGEND Communications System Release 7.0
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-631 Data Features
3
u
Extension Information Procedure
3
Console Display/Instructions Additional Information PC
1. Enter the number of the extension for which you want a report (
nnnn
).
2. Save your entry.
Select
Enter.
3. Return to Step 4 of the main procedure.
Data Features
3
This section covers the programming procedure for analog multiline telephones
connected by a General-Purpose Adapter (GPA) to a data terminal and modem.
Other data programming procedures can be found in earlier sections of this book
(see
Table 3-7 ), with the exception of ringing options. See ‘‘Ringing Options’’ on
page 4-37 for information about ringing options.
Extension Info
Enter extension number
Backspace
Exit Enter SP: “Entering an Extension”
Ã
Table 3-7. Other Data Programming Procedures
Procedure Location
Assign Trunks or Pools to
Data Workstations ‘‘Assign Trunks or Pools to Extensions’’ on page
3-268
Copy Trunk Assignments ‘‘Copy Line/Trunk Assignments’’ on page 3-274
Assign Intercom or System
Access Buttons ‘‘Assign Intercom or System Access Buttons’’ on
page 3-279
Pool Dial-Out Code
(Hybrid/PBX only) ‘‘Pool Dial-Out Code’’ on page 3-324
Calling Restrictions ‘‘Calling Restrictions’’ on page 3-327
Copy Calling Restrictions ‘‘Copy Calling Restrictions’’ on page 3-329
Forced Account Code Entry ‘‘Forced Account Code Entry’’ on page 3-337