DEFINITY ECS Release 6
System Description Pocket Reference
555-230-211
Issue 2
January 1998
Page 7
Release 3.0 Enhancements
Release 3.0 Enhancements
Release 3.0 includes all Release 2.1 functionality plus the
enhancements listed below.
Equipment
New hardware includes a variety of components. Additional details
are included elsewhere in this book.
■
CPU modifications include:
A processor running at 16 MHz with a 32-bit wide data bus
1.5 Mbytes of non-volatile (battery-backed) RAM
4.0 Mbytes of Flash ROM
PCMCIA memory card interface
A full-duplex 1200/2400 bps modem
Error/Status code display for maintenance support
■
An 800 GS/LS-ID line/trunk module delivers the calling party’s
telephone number to the customer premises (MLX display
telephones only) if the service is subscribed to by the customer
and if it is supported by the caller’s telephone company.
■
Support for:
MDC 9000 (6-line, cordless)
MDW 9000 (6-line, cordless, wireless)
8101 (single-line telephone, desk or wall-mount, data/fax jack,
selectable positive disconnect)
2500 YMGL and 2500 MMGL (single-line desk telephones,
selectable positive disconnect)
Picasso
™
Still-Image telephone (for interactive display of still
images)
■
Videophone 2500 single-line phone with interactive video
display
■
Pre-fabricated and pre-drilled backboard
Installation, Upgrade Administration, and Maintenance
These are the new MERLIN LEGEND Communications System
capabilities:
■
SPM (Release 3.18) conversion of translations from Release
1.0, 1.1, 2.0, and 2.1 to 3.0
■
Remote operation at 1200/2400bps
■
Advice and feedback administration screens for new Release
3.0 functionality
■
PCMCIA Memory Card Interface (a Release 3.0 processor
board required) allowing:
—
System software installation
—
System software upgrade
—
800 GS/LS-ID port module firmware upgrade
—
Integrated backup and restore of translations
Automatic and manual options for backup and restore are
available on the system. Automatic backup can be scheduled
weekly or daily to fit the customer’s needs.
■
Inter-digit dialing timer values are administrable