3
Using the MDW 9031/9031DCP Pocket Phone
Handset
MDW 9031/9031DCP Wireless Pocket Phone Installation and Use
503-801-166
80
Issue 3 October 1999
3
While still holding
"
, press
O
.
The handset beeps twice, and the display shows the handset settings, indicating
you are in Local Mode. (While in Local Mode, the MDW 9031/9031DCP can still
receive notification of incoming calls.)
If Line Preselection is enabled, PSEL appears on the top line of the display. For
example:
If Line Preselection is disabled, no icon appears.
4
Press and hold “P” (
7
) for three seconds.
The handset display shows PRESELECTION:ON if Line Preselection is
enabled or PRESELECTION:OFF if Line Preselection is disabled. For
example:
5
To toggle between ON and OFF to enable or disable Line Preselection, press
"
.
6
To exit Local Mode, press
O
.
Enabling or Disabling
Backlighting
Backlighting for the display is factory set to ON for the MDW 9031/9031DCP Pocket
Phone. To toggle the Backlighting features OFF (and ON), use the following
procedure:
1
Make sure the handset is turned off.
2
Press and hold the Select button (
"
) for three seconds.
3
While still holding
"
, press
O
.
The handset beeps twice, and the display shows the handset settings, indicating
you are in Local Mode. (While in Local Mode, the MDW 9031/9031DCP can still
receive notification of incoming calls.)
a
Press “L” (
5
) for “Lighting.” The Backlighting toggles ON or OFF each time
you press the
5
.
b
After setting the correct Backlighting state, press
O
for normal Pocket
Phone use.
