Lucent Technologies MDW 9031 Installation And Use Manual Download

Page: 84 / 161

Using the MDW 9031/9031DCP Pocket Phone

Handset

MDW 9031/9031DCP Wireless Pocket Phone Installation and Use

503-801-166

Issue 3 October 1999

Attaching the Metal
Carrying Clips

To attach the metal carrying clip to the battery pack, do the following:

Remove the battery pack from the handset, as described in “Inserting and
Removing the Handset's Battery Pack” in Chapter 2.

Place the two metal tabs on the clip into the slots on the battery pack, with the
“hooks” toward the bottom of the battery pack.

Slide the clip toward the bottom of the battery pack to engage the hooks.

Reinsert the battery pack in the handset, as described in “Inserting and Removing
the Handset’s Battery Pack” in Chapter 2.

Attaching the Plastic
Clips

To attach the plastic clips to the battery pack, do the following:

Remove the battery pack from the handset, as described in “Inserting and
Removing the Handset's Battery Pack” in Chapter 2.

Hold the battery pack so that the back of the battery pack is facing you.

Hold the carrying clip so that it looks like the letter “ T.”

Standard Spare

Battery Pack

Extended Spare

Battery Pack

Summary of Contents for MDW 9031

































































































































































Search results

Summary of Contents for MDW 9031

Reviews:

Related manuals for MDW 9031

Brands by name

Popular brands

Lucent Technologies MDW 9031, Installation And Use Manual

Search results

Summary of Contents for MDW 9031

Reviews:

Related manuals for MDW 9031

Brands by name

Popular brands