As you dial characters for the programming procedures, the characters
appear on your screen.
If you touch a button that has already been programmed, the display
identifies the name of the feature on that button. The screen below
shows that you have programmed the Last Number Redial feature on
this voice terminal button.
If the button has not been programmed, this message appears on the
display screen:
If you touch a fixed feature, or nonprogrammable button, such as
Conference, the following message appears on the display screen:
(Note that you can use nonprogrammable buttons, such as Hold or
Recall, to enter a special character, such as a pause or a stop, into a
dialing sequence. Also, pressing Hold will cause “ERROR” to be
displayed.) If you dial incorrect numbers or characters, you will see this
message:
Transfer Return Identification
When you transfer a call to another voice terminal and the call is
unanswered, the call returns to your voice terminal. The intercom
number or label of the voice terminal from which the call is returning
appears on the screen.
iss 3, cib3090-22
