Fijian II Installation Instructions
7 |
P a g e
FINISHING THE INSTALLATION
•
After completing the electrical connection at the mounting bracket terminal block, connect the ceiling fan wiring via
the quick connector plug.
•
Cover the mounting bracket with the canopy. Ensure all electrical wiring is tucked inside the canopy and that they
are not damaged during this step. Secure the canopy to the hanger bracket using the screws provided. Fig 10.
LIGHT FUNCTION (Light kit sold separately)
This fan can use a light kit which is available at Beacon Lighting. Remove the light kit housing cover and install the light
kit to switch housing. For details please refer to the light kit installation guide.
The fan light can be switched ON/OFF via the light switch on the wall controller. Fig.11
NOTE: ONLY LIGHT KITS RECOMMENDED BY THE SUPPLIER WILL BE COVERED UNDER WARRANTY.
Fig. 10
