Fijian II Installation Instructions
5 |
P a g e
HANGING THE FAN
INSTALLING THE DOWN ROD
1. Loosen the ball joint.
2. Feed the down rod through the ceiling canopy.
3. Insert the motor wires through the down rod and secure the ball joint back to the down rod.
4. Insert the down rod to the hanger, line up the hanger holes with the down rod holes and insert bolt.
Insert the pin to the end of the bolt.
5. Finally secure the down rod and hanger via tightening two screws on the hanger. Fig. 4
6. Lift fan assembly onto mounting bracket.
7. Ensure the notch of the ball joint is positioned on the stopper of mounting bracket to prevent the fan from
rotating when in operation. Fig. 5
INSTALLATION INSTRUCTIONS - BLADE INSTALLATION
FAN BLADE ATTACHMENT
•
Secure the blade to the blade holder using screws provided. Fig. 8
•
Attach the blade assembled to the motor and secure it via tightening the motor screws. Repeat above process
to finish installation of all 5 blades. Fig. 9
Fig. 4
Fig. 5
Fig. 6
Fig. 7
