Fijian II Installation Instructions
3 |
P a g e
PARTS LIST
•
Unpack your ceiling fan carefully. Remove all parts and hardware. Place the fan motor on a cloth or soft surface
to avoid damaging the finish.
•
Do not lay the motor housing on its side –the decorative housing may become bent or damaged.
•
Verify that all parts are present before starting assembly.
•
Check the packaging carefully for missing parts.
Examine all parts. You should have the following:
1
Down rod x 1
8
Blade screws x 16
2
Blade holder x 5
9
Motor screws x 11
3
Blade x 5
10
Wooden screws x 2
4
Mounting bracket x 1
11
Wall plugs for screw x 2
5
Canopy x 1
12
Balance kits x 1 sets
6
Motor x 1
13
Wall controller x 1
7
Switch housing x 1
TOOLS REQUIRED
-
Phillips / Flat head screw driver
-
Pair of pliers
-
Adjustable Spanner
-
Step ladder
-
Wire cutter
-
Wiring, supply cable as required by AS/NZS 3000 wiring code.
Fig. 1
