Installation Instructions
3 |
P a g e
v 1 . 0
LOOP TERMINAL:
The loop terminal is provided as a second live supply terminal. It is useful when a switch is included into the wiring as
shown in the diagram below. (Figure G)
WARNING:
ALL WIRING CONNECTION AND DISCONNECTION MUST BE PERFORMED BY A LICENSED
ELECTRICIAN.
(FIGURE G)
HOW TO REPLACE THE LED DRIVER:
1. Ensure the power is off. (figure A)
2. Remove the shade from the fitting by rotating it anti-clockwise. (Figure B)
3. Unplug the input and output wire connectors from the old LED driver. (Figure C)
4. Remove the LED driver from the lamp base by loosening 2 screws on the side. (Figure C)
5. Install the new replacement LED driver by tightening the 2 screws and reconnect the input and output wire
connectors together. (Figure E)
6. Install the shade back onto the fitting by rotating it clockwise and ensure the shade is secured tightly. (Figure F)
