Installation Instructions
2 |
P a g e
v 1 . 0
Installation Directions
1. Remove all packaging material from the product and be careful not to throw away accessories that may be hidden
within the packaging material. (Figure A)
2. Remove the shade from the fitting by rotating it anti-clockwise. (Figure B)
3. Use the fitting as a template to mark the screw positions onto the ceiling.
4. Install the fitting onto the ceiling by using appropriately sized mounting screws and anchors. (Figure C)
Ensure the mounting screws and anchors used are suitable for the mounting surface.
5. Remove the cover from the terminal block and connect the mains supply wire to the terminal block. (Figure D).
Mains Supply Wire
Fitting Wire
Earth
– Yellow/Green
Yellow/Green
Neutral
– Blue or Black
Blue
Live
– Brown or Red
Brown
Ensure that the wires are secure and no bare wires are exposed. Install the cover back over the terminal block.
NOTE:
A loop terminal is provided on the terminal block. Please see the
LOOP TERMINAL
section for assistance
with the wiring connection and a diagram. (Figure G)
6. Install the shade back onto the fitting by rotating it clockwise and ensure the shade is secured tightly. (Figure F)
7. After the installation, switch on the fitting to test all the lighting functions and enjoy your new lighting product.
