Tempair
3 in 1 Exhaust Fan
Installation Instructions
5
|
P a g e
V e r 1 . 3
9.
Feed ducting from blower, in Step 5 through the hole cut into the ceiling in Step 3 and connect to the
heater air outlet. Use tape to secure if required. Now the ducting between the heater unit and ducted fan
is complete.
10.
Remove the fascia and disconnect power to the LED light by twisting and pulling apart the connectors.
11.
Insert heater unit (without the fascia) into the hole in the ceiling and push up. The 4 metal strip springs
will be push in, and then push back out to secure onto the heater body into the cutout in the ceiling.
Caution:
For your safety - All electrical wiring
connections must be performed by a licensed
electrician.
Fig. 4
Fig. 5
WARNING: FOR SAFE USE OF THIS
APPLIANCE, MEANS FOR ALL-POLE
DISCONNECTION MUST BE INCORPORATED
IN THE FIXED WIRING IN ACCORDANCE
WITH THE WIRING RULES..
This is a requirement of clause 7.12.2 of the
household appliance
Standard
AS/NZS 60335.1-
2011 or the latest standard*
Please note
warranty will be void if installed without a mean
for all-pole disconnection included in the wiring.
