TVIP001CS
•
Use the snap fi t end plates to cover screw fi xings.
•
Turn the on/off switch on the inverter to the ON (I) position.
•
The unit can now be controlled remotely via the LCD display.
* See section 4.1 for model specifi cations
3.8
Current Sensor:
The Lucas TVS Current Sensor (TVIP001CS) is an additional option that allows the monitoring
of the DC input current and allows the operator to view the estimates hours of battery time
remaining on the LCD Display.
To install an LCD display kit please follow the instructions below.
•
Ensure the unit on/off switch is in the OFF (O) position.
•
Remove the screws (2) that hold the LCD Display in position.
•
Pull the LCD display forward and disconnect the data cable from both the LCD
display and the Display Port on the unit.
•
Connect the extension lead to the Display Port on the unit
•
Attach the Blanking Plate to the unit, feeding the Extension Cable through the gap,
then screw into position.
•
Fix the mounting frame where the LCD display is required.
•
Thread the extension cable through the rear of the mounting frame and plug into
the port on the back of the LCD display.
•
Insert the LCD display into the mounting frame and screw into place.
