LUCAM B.V
Lucam b.v * Dukaat 19 * 8305BC * Emmeloord
3
1. General
1.1. Applications.
The air handling units are calculated in compliance with the ERP directive for comfort ventilation. Depending
on the selected variant, these are used such as offices, schools, nurseries, public spaces, shops, homes, etc.
The air handling units are designed in such a way that the air flows are separated. Also, the air handling
units are suitable for indoor and outdoor installation with a standard hygienic execution by using a very
smooth surface with a unique rubber seal.
The HCP air handling units with a standard capacity of 600-16,800m3/h and is a compact ventilation system
with a thermal efficiency of up to 90%. These units are equipped with fans provided with EC technology
motors.
The HRW air handling units with a standard capacity of 1,200-28,000m3/h and is a compact ventilation
system with a thermal efficiency of up to 80% and a latent efficiency up to 80% These units are equipped
with fans provided with EC technology motors.
The Fairtype air handling units with a standard capacity of 600-16,800m3/h and it is a compact ventilation
system with a thermal efficiency of up to 90% including an indirect evaporation section for cooling with an
evaporation efficiency of up to 115%. These units are equipped with fans provided with EC technology
motors.
2. Safety instructions
The installation of the air handling unit must be carried out in accordance with the general and locally
applicable building, safety and installation regulations of municipality, electricity and water supply company.
Personnel concerned must familiarize themselves with this instruction before starting up this installation.
Damage to the air handling unit or parts thereof, as a result of improper handling by the end user
or the installer is not covered by the warranty
Warning
Only licensed electrician or service personnel trained by Lucam b.v may do changes to the air
handling unit regarding the electrical installation or connections perform external functions.
2.1 Safety switch / main switch
There is a main switch on the air handling unit, which is located on the operating side of the unit. The air
handling unit should usually be started and stopped via the terminal, not with safety switch.
Always switch off the main switch when carrying out work on the air handling unit, unless otherwise stated
in the appropriate instruction.
