Lubemaster OS600 Std
3102 Operating Manual V2020.01
Page
18
of
29
•
Clean all sludge from all surfaces inside the rotor, remembering to examine the sludge for
abnormal particles.
•
After cleaning all components, lightly oil the base and sit it upright in a clean area ready for
assembly.
•
Next clean the “O” ring and separator plate and lightly oil.
•
Place the “O” ring on the base perimeter and locate the balance marks on the b
ase.
•
Place the separator plate on the base and be sure that it sits neat and free. Never force to align
the separator
•
Lightly oil the rotor sleeve and place it on the base, checking
that the “O” ring is not damaged
as the sleeve fits into place. Do not force the assembly.
