LU-VE Alfa LU-VE AlfaBlue Junior AG, Instruction Manual

Page: 9 / 24

AHE00060EN 2010
9
Alfa LU-VE is a trademark registered and owned by LU-VE Group.
Alfa LU-VE reserves the right to change specifications without prior notification.
All units are packed and shipped in horizontal
airflow position. For setup with vertical airflow,
the mounting feet (kit) must be mounted prior
to installation. For this purpose the unit must be
lifted and tilted 90° onto supports. Use supports
for each mounting foot position. The supports
must span the full casing width to avoid damage
to the finned coil.
Loosen fixing bolts and remove all mounting
profiles. For AG/XG 630 models, also remove
the lifting lugs positioned on the opposite casing
side.
Replace all mounting profiles with the supplied
mounting feet. Mounting feet should be fitted on
both sides of the casing at all vacant mounting
feet and lifting lug positions.
With all mounting feet in place, the unit is ready
for further positioning and installation.
4.3 Feet mounting for vertical airflow