EURO-ADAPTOR LA 30
Max: 250 V, 6 A (6), 50 N
Universal 3-circuit track adaptor compatible with EUTRAC 3-circuit
mains track system.
Mechanical connecting to the track
Please make sure that the lever
“A”
is in the open position (i.e. 90 deg
to the adaptor length) and the phase-selector
“B”
is in position
“0”
(Fig. 1)
The two location lugs
“C”
have to match the plane profile section or
a relevant groove in the track (Fig. 2).
The adaptor is connected to the track by pushing firmly into the track
and after the lever
”A”
has been moved into the locked position (i.e.
shows in length of the adaptor).
Selection of circuits
Selection of circuits can only be effected after the red engagement
safety pin
“D”
has been pushed into the adaptor, i.e. after the adaptor
itself has been connected to the track properly.
In order to select circuits
1
or
2
push the phase selector
“B”
inwards
and rotate accordingly to the symbols (Fig. 1).
In order to select circuit No
3
simply rotate the phase selector into the
location indicated out of the lower position.
Unlocking of adaptor from track
Rotate the phase-selector
“B”
back into the
“0”
position. Hold then
the spotlight in one hand and put the lever
”A”
back into the open
position with the other hand. The whole unit can be taken from the
track.
Note:
Before using you must ensure that the electrical, mechanical
and thermal compatibility between contact track system and the
mounted luminaire is guaranteed.
Fon: + 49 (0) 75 42 - 93 07 - 0
Fax: + 49 (0) 75 42 - 5 33 40
E-Mail: [email protected]
www.lts-licht.de
LTS Licht & Leuchten GmbH
Waldesch 24
D - 88069 Tettnang
