User manual of POE-SW1602/POE-SW2402
17
Chapter 3
Physical Connection
3.1
Connect to RJ45 Ports
Connect the switch to a remote device with Ethernet cable via RJ45 port. G1 and G2 are uplink ports. Ports
1-16/24 support IEEE 802.3af and IEEE 802.3at PoE supply, and the PD can be wireless AP, IP phone or IP camera,
etc. By default, PoE features of Ports 1-16/24 are enabled.
Figure 3.1 RJ45 port connection
Note that
:
1.
Cat 5e or better Ethernet cable is recommended. As each RJ45 port supports MDI/MDIX auto-negotiating,
either parallel or crossover cable is available.
2.
The device supports dynamic PoE supply. Namely, the device will power the PD properly and automatically.
3.2
Connect to SFP Combo
1)
Insert your optical module into the SFP port (G1-F/G2-F).