LTS LTN8916, User Manual, Page: 179 / 202

User Manual of Network Video Recorder
178
•
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration by default.
User’s MAC Address: The MAC address of the remote PC which logs onto the NVR. If it is configured and
enabled, it only allows the remote user with this MAC address to access the NVR.
4. Click the OK button to save the settings and go back to the User Management interface. The added new
user will be displayed on the list, as shown in Figure 15. 6.
Figure 15. 6 Added User Listed in User Management Interface
5. Select the user from the list and then click the button to enter the Permission settings interface, as
shown in Figure 15. 7.
Figure 15. 7 User Permission Settings Interface
6. Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for
the user.
Local Configuration
•
Local Log Search: Searching and viewing logs and system information of NVR.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
•
Local Camera Management: The adding, deleting and editing of IP cameras.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property),
upgrading system firmware, clearing I/O alarm output.
•
Local Shutdown Reboot: Shutting down or rebooting the NVR.
Remote Configuration
•
Remote Log Search: Remotely viewing logs that are saved on the NVR.
•
Remote Parameters Settings: Remotely configuring parameters, restoring factory default parameters