LTS LTN8916 User Manual Download Page 128

Page: 128 / 202

User Manual of Network Video Recorder

127

Figure 11. 2

Net Fault-tolerance Working Mode

11.2

Configuring Advanced Settings

11.2.1

Configuring PPPoE Settings

Purpose:

Your NVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).

Steps:

Enter the

Network Settings

interface.

Menu >Configuration> Network

Select the

PPPoE

tab to enter the PPPoE Settings interface, as shown in Figure 11. 3.

Figure 11. 3

PPPoE Settings Interface

Check the

PPPoE

checkbox to enable this feature.

Enter

User Name

, and

Password

for PPPoE access.

The User Name and Password should be assigned by your ISP.

Click the

Apply

button to save and exit the interface.

After successful settings, the system asks you to reboot the device to enable the new settings, and the

PPPoE dial-up is automatically connected after reboot.

You can go to Menu >Maintenance>System Info >Network interface to view the status of PPPoE connection.

Please refer to

Chapter Viewing System Information

for PPPoE status.

Summary of Contents for LTN8916











































































































































































































Search results

Summary of Contents for LTN8916

Reviews:

LTS LTN8916, User Manual, Page: 128 / 202

Search results

Summary of Contents for LTN8916

Reviews: