LTS LTN8916 User Manual Download Page 100

Page: 100 / 202

User Manual of Network Video Recorder

The size of the currently selected files is displayed in the lower-left corner of the window.

Figure 7. 6

Result of Normal Video Search for Backup

Export the video files or picture files.

Click

Export All

button to export all the files.

Or you can select recording files you want to back up, and click

Export

button to enter Export interface.

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drives or USB HDDs via the device.

Figure 7. 7

Export by Normal Video Search using USB Flash Drive

Stay in the Exporting interface until all record files are exported with pop-up message box “Export

finished”.

Summary of Contents for LTN8916











































































































































































































Search results

Summary of Contents for LTN8916

Reviews:

LTS LTN8916, User Manual, Page: 100 / 202

Search results

Summary of Contents for LTN8916

Reviews: