LTS CMHR92T2-28, User Manual

Page: 3 / 10

1 Introduction
1.1 Product Features
This series of camera adopts high performance sensor
and advanced circuit board design technology. It
features high resolution, low distortion, and low noise,
etc. It is suitable for surveillance system and image
process system.
The main features are as follows:

High performance CMOS sensor and high resolution
bring high-quality image;

Low illumination, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR;

IR cut filter with auto switch;

OSD menu, parameters are configurable;

Auto white balance and internal synchronization;

SMART IR mode;

Advanced 3-axis design meets different installation
requirements;
1.2 Overview
This manual applies to two types of bullet cameras.
The overviews of each type are shown in the figures below,
please refer to the actual sample.
1.2.1 Overview of Type I Camera
Main Body
Photoconductive Resistance
Lens
Bracket
Video Cable
DC 12V
Power Cord
Figure 1-1 Overview of Type I Camera
1.2.2 Overview of Type IICamera
Camera
Bracket
Video Cable
DC 12V Power Cord
Lens
Figure 1-2 Overview of Type II Camera
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com