LTR BSG 012_FW, Manual, Page: 13 / 32

- 13 -
6. Technical data and accessories
Pressure gauge measuring range: 0 to 4 bar
Power supply: depending on unit model: 12 VDC, 115 VAC , 230 VAC
Filling hose: with quick coupling: 3 m
Dimensions: 300 / 350 / 400 mm (W/D/H
Weight: 5 kg
Operating, ambient
temperature range: 0...45 °C
Air humidity: 40 - 60%
Fuse values: 1A time-lag fuse
IP protection class: IP20
Supply connection (for cart) available voltage = supply voltage of the device current drain max. 1A
Accessories see page 31:
FW 100513_1 Cart (can be used for all BSG models)
FW 11ODL 100513_2 Cart, 115 VAC with extraction unit, for units with 115 V power supply
FW 230DL 100513_3 Cart, 230 VAC with extraction unit, for units with 230 V power supply
NOTE:
•
For information on evaluating the brake fluid, see the section on brake systems in the
current Leitenberger catalogue.
• EBT 01 Electric brake fluid tester (100124 for DOT 4).
• EBT 03 Electric brake fluid tester (100128 for DOT 3, DOT 4, DOT 4 Plus and DOT 5.1).
• EBT 06 Electric brake fluid tester (100134 for DOT 3, DOT 4 and DOT 5.1).
• BC 04 Refractometer (100601 measuring of refractive indices for DOT 4 and DOT 4 Plus).
7. Troubleshooting
Problem Cause Remedy
Pump suction failure
Original brake fluid container empty Replace original brake fluid container
Pressure regulator set to „MINUS“ Set correct operating pressure
Suction hose kinked Remove kink, replace defective
hose
Filter suction hose clogged Clean or replace filter
Pump fails to run on automatically Original brake fluid container empty Replace original brake fluid
container with new one
No power supply at unit Fuse defective Replace fuse
No voltage on the on-board socket Fuse defective or ignition not
activated If necessary replace the fuse, insert
the ignition, check the socket.
en
gli
sh