Ltl Acorn Ltl-6310M, User Manual, Page: 12 / 35

- 10 -
An important first step is to determine the format of the files that the camera will send you. On the
right of the first row where it says MMS Status, choose among three options: “VGA”, “SMS”, and
“OFF”.

VGA: the camera will send 640X480 pictures to your phone or e-mail account

SMS: the camera will send only texts to you
OFF: the camera will not send anything
Then you need to choose how you like to set up the MMS Mode
-- Auto or Manual . Choose Auto (recommended), then select the
country and the Mobile Phone Network Operator (MPNO). With
Auto setup, the URL, APN, Gateway, and Port sections will be in gray. You would only need to
input the phone number and/or email address you’d like to receive MMS pictures. You can
enter up to three different phone numbers and/or email accounts .
NOTE : At least one valid phone number needs to be put in. Otherwise the camera would not be
able to send data. The phone number cannot start with 0. If used locally, the country code needs
not be included; if absolutely necessary, please replace the initial zero(s) with “+”. For example
：
“001” would become “+1”.
If you choose Manual to manually input all the parameters, you need to contact your Mobile
Phone Network Operator (MPNO) to have them provide you all the required information such as
URL, APN, Gateway, and Port.
NOTE : The MMS parameters of the major MPNO’s in each country have been pre-stored in the
setup program. You’re recommended to choose Auto to let the system to set up the MMS.
However, because each local MPNO has their own settings for their MMS service, and those
settings can change over time, you may need to acquire the settings from your MPNO if the
Auto -selected settings fail to work. If you find out those settings have changed according to the
information provided by your MPNO, or you have settings from your MPNO that is not on our
Operators list, please notify us so we can update our program.
Click on to find and choose the drive where the SD card is placed. For example, the
SD card is inserted on Drive F:\. Then you select only F:\. DO NOT choose any folder under F:\.
Click on . A message window pops out as below. Click OK . A file named setup.dat
has been created and saved in the root directory of the SD card.
LTL ACORN®