Page 9
Note:
After configure any parameters of the device, you must click the “
Save & Apply
” button to
save the configuration otherwise the configuration will not take effect.
APN Setting-Bearer configure
The Bearer List is design for the operator to configure the APN. You can configure the only one
APN for all the service classes, as follow:
And the operator also can configure two APNs for Manage and data service classes. As follow
picture, the Management Data Class will be transport via the “internet1
“
network and the Data
Traffic Class will be transport via the “internet2
”
network.
And the CPE will obtain two different IP for two networks.
3.4. Network
Configuration