LSM V5HD, Operator'S Instruction Manual

Page: 8 / 44

8
Machine Installation
Although the baler is suitable for outside use it is recommended that it is located inside or
under a protective cover. Doing so will extend the life of your machine.
It is important to know how to safely move your machine into position. To do this use
either a fork truck or a pallet truck and lift the machine via the base (page 6.) Do not
attempt to move the machine by hand as this could cause injury to you or damage the
machine.
Fix your machine to a
solid level surface to avoid movement while in operation. Brackets
are provided with to the baler so it can be screwed into a wall or sound concrete ground.
Use with proper fixings (M12 rawl bolts) and bolt down on 2 corners as shown in below.
B
a
l
e
r
F
o
M12 ANCHOR BOLTS
FITTED TO FLOOR /
WALL BRACKETS
PROVIDED
M12 ANCHOR BOLTS x 2
FLOOR BRACKETS X 2
Baler Footprint