Appendix 1 Flag List
App. 1
-
10
Appendix 1.2 Communication Relay (L) List
Here describes data link communication relay(L).
[Table 1] Communication Flag List according to High speed link no.(High speed link no. 1 ~ 12)
No.
Keyword
Type
Contents
Description
L000000 _HS1_RLINK
Bit
High speed link
parameter 1
normal operation
of all station
Indicates normal operation of all station according to
parameter set in High speed link, and ON under the
condition as below.
1. In case that all station set in parameter is RUN mode and
no error,
2. All data block set in parameter is communicated normally,
and
3. The parameter set in each station itself is communicated
normally.
Once RUN_LINK is ON, it keeps ON unless stopped by
LINK_DISABLE.
L000001 _HS1_LTRBL
Bit
Abnormal state
after _HS1RLINK
ON
In the state of _HSmRLINK flag ON, if communication state
of the station set in the parameter and data block is as
follows, this flag shall be ON.
1. In case that the station set in the parameter is not RUN
mode, or
2. There is an error in the station set in the parameter, or
3. The communication state of data block set in the parameter
is not good.
LINK TROUBLE shall be ON if the above 1, 2 & 3 conditions
occur, and if the condition return to the normal state, it shall
be OFF again.
L000020
~
L00009F
_HS1_STATE[k]
(k=000~127)
Bit
Array
High speed link
parameter 1, k
block general
state
Indicates the general state of communication information for
each data block of setting parameter.
HS1STATE[k]=HS1MOD[k]&_HS1TRX[k]&(~_HSmERR[k])
L000100
~
L00017F
_HS1_MOD[k]
(k=000~127)
Bit
Array
High speed link
parameter 1, k
block station RUN
operation mode
Indicates operation mode of station set in k data block of
parameter.
L000180
~
L00025F
_HS1_TRX[k]
(k=000~127)
Bit
Array
Normal
communication
with High speed
link parameter
1, k block station
Indicates if communication state of k data of parameter is
communicated smoothly according to the setting.
L000260
~
L00033F
_HS1_ERR[k]
(k=000~127)
Bit
Array
High speed link
parameter 1, k
block station
operation error
mode
Indicates if the error occurs in the communication state of k
data block of parameter.
L000340
~
L00041F
_HS1_SETBLOC
K[k]
Bit
Array
High speed link
parameter 1, k
block setting
Indicates whether or not to set k data block of parameter.
