3
1 Safety-Related Guidelines for LSPV inverter
1.1 Introduction
To prevent personal injury and/or material damage, read the following notes before first putting the
system into operation. The safety-related guidelines must be observed at all times.
Before first start-up of this device, we strongly recommend you carefully read all supplied docu-
ments. You should also study the safety-related guidelines and all other user instructions each time
before you start working on this device. Should you have no user information regarding this device,
refer to LSIS. Ask for the documents to be sent immediately to those responsible for safe operation
of the device.
When selling, letting, or otherwise passing on the device to third parties, always enclose these
safety-related guidelines!
WARNING
Any misuse of these devices and failure to observe the warnings con-
tained herein or improper interference with the safety equipment and
the device may result in material damage, personal injury, electric
shock, or even death.
WARNING
Electric shock!
Do not open the device! Dangerous voltage may still be applied inside
the device even after it has been switched off.
1.2 Explanations
These safety-related guidelines use the following ANSI notations to describe the various levels of
danger:
Warning sym-
bol with signal
word
Danger level according to ANSI
The danger level identifies the danger involved in failure to observe the
safety-related guidelines:
DANGER
Death or severe personal injury will occur.
WARNING
Death or severe personal injury may occur.
CAUTION
Personal injury or material damage may occur.
