Chapter 10. Installation and Wiring
10-4
(2) XGT Panel installation
Keep the distance of 100 mm between XGT Panel and panel per each direction.
Remark
(1) To be affected at a minimum by the electromagnetic waves (radial noise) or heat from other controllers, it needs to keep its
distance as the above explanation.
(2) When installing, consider the power and communication cable wiring.
(3) If the size of the panel cutout dimensions are beyond the error range (0-1mm), the contact surface between the
gasket and the panel may be reduced. This may weaken the protection from water and dust ingress.
When mounting the XGT Panel inside a panel, ensure that you use the gasket to protect against dust or water ingress.
Unit: [mm]
100
100
100
100
100
Dustproof / Waterproof
gasket