LSI-Robway RCI-1550 LM, Instruction Manual, Page: 31 / 97

7.2.3.
View Boom Angle item
Displays the calibrated and un-calibrated values.
VIEW BOOM ANGLE
F07:
Uncal. =
555
Cal. =
23.22
hh:mm
7.2.3.1. CAL LOW BOOM ANGLE item
Allows the low end of the selected item to be calibrated using the numeric buttons. The
current raw value and calibrated value are displayed and below it the edited value. Once
the edit is complete, pressing OK will result in the Display request the controller to do a
calibration change. Pressing Cancel at any time will abort the edit and return the operator
to the Function codes menu screen.
CAL LOW B.ANGLE
F08:
Uncal. =
555
Cal. =
24.34
Edit =
133.6
hh:mm
7.2.3.2. CAL HIGH BOOM ANGLE item
The graphical LCD will appear similar to CAL LOW BOOM ANGLE.
7.2.4.
View Jib Angle item
This function code item is only available for Luffing fly systems.
The graphical LCD will appear similar to VIEW BOOM ANGLE.
7.2.4.1. CAL LOW J.ANGLE item
This function code item is only available for Luffing fly systems.
The graphical LCD will appear similar to CAL LOW B.ANGLE.
7.2.4.2. CAL HIGH JIB ANGLE item
This function code item is only available for Luffing fly systems.
The graphical LCD will appear similar to CAL LOW B.ANGLE.
7.2.5.
View Length item
The graphical LCD will appear similar to VIEW BOOM ANGLE.
7.2.5.1. CAL SHORT LENGTH item
The graphical LCD will appear similar to CAL LOW B.ANGLE.
7.2.5.2. CAL LONG LENGTH item
The graphical LCD will appear similar to CAL LOW B.ANGLE.