LSG SSN105, User Manual

Page: 10 / 24

10 | ASSEMBLY INSTRUCTIONS
STEP 2
1. The two counterweight cushions (#26) are respectively mounted on the guide rod(#5). As shown in
the figure, the weight distribution block (#25) is perforated one by one, and then, after the end, the
added bar (#8) is put into the middle adjustment hole of the weight distribution block, and finally the
weight distribution top block (#24) is put in. Fix M10 nut (#58) to guide rod (#5) with Hexagon bolt
M10*45 (#49).
2. Connect the column (#7) with two M10 (#58) and two gaskets (#55) to the front patch (#1).
3. The upper beam (#6) is connected to the guide rod (#5) and the column (#7), respectively, and fixed
with two bolts, the hexagonal bolt M10*20 (#48), four
Φ
10 flat gaskets (#55), two horse-drawn bolts,
M10*70 (#47), a 110mm connecting plate (#21) and two M10 nuts (#58), respectively.
#47 M10*70 2PCS
#49 M10*45 2PCS
#55
Ø
10 6PCS
#58 M10 6PCS
#49 M10*45 2PCS
58
55
21 6
48
55
49
23
47
5
58
7
8
24
25
26
2
58
55
1