![background image](http://html1.mh-extra.com/html/lsc/powerpoint/powerpoint_installation-and-operation-manual_1943936004.webp)
PowerPoint
Installation and Operation Manual
Page 4
5.3.2
Power Outputs
Always ensure the Output Load RCBOs are in the OFF position before connecting or
disconnecting any loads.
The individual outputs are fed from the following input power phases. This input phase
numbering is also shown on the front panel below each output circuit breaker.
Input Phase Output Input Phase Output
1
1
1
7
2
2
2
8
3
3
3
9
1
4
1
10
2
5
2
11
3
6
3
12
The following output connections are available (12-channel PowerPoint shown):
Australian Outputs
Schuko Outputs
Installation Screw Terminals
Socapex Outputs
Connector #1 Function
Connector #2 Function
Pin 1 Chan 1 Active
Pin 1 Chan 7 Active
Pin 2 Chan 1 Neutral
Pin 2 Chan 7 Neutral
Pin 3 Chan 2 Active
Pin 3 Chan 8 Active
Pin 4 Chan 2 Neutral
Pin 4 Chan 8 Neutral
Pin 5 Chan 3 Active
Pin 5 Chan 9 Active
Pin 6 Chan 3 Neutral
Pin 6 Chan 9 Neutral
Pin 7 Chan 4 Active
Pin 7 Chan 10 Active
Pin 8 Chan 4 Neutral
Pin 8 Chan 10 Neutral
Pin 9 Chan 5 Active
Pin 9 Chan 11 Active
Pin 10 Chan 5 Neutral
Pin 10 Chan 11 Neutral
Pin 11 Chan 6 Active
Pin 11 Chan 12 Active
Pin 12 Chan 6 Neutral
Pin 12 Chan 12 Neutral
Pin 13 Earth
Pin 13 Earth
Pin 14 Earth
Pin 14 Earth
Pin 15 Earth
Pin 15 Earth
Pin 16 Earth
Pin 16 Earth
Pin 17 Earth
Pin 17 Earth
Pin 18 Earth
Pin 18 Earth
Pin 19 Earth
Pin 19 Earth
Connector 1
Connector 2
Output Channel
Number Chart
Green = On
Output Channel
Number Chart
Green = On
Output Channel
Labels
Green = On