The catalog of products for the visually impaired and hard of hearing
1-800-468-4789 (Toll Free, Monday
– Friday 9am-5pm Eastern Time)
One Button, Dual Voice Analog Watches: Setting Instructions
101097 / 101098
This watch should arrive in sleep mode, with all talking features turned off. To turn the
talking features on, press and hold the top right (TR) button for 5 seconds until you
hear a beep. To turns the talking features off, repeat this process.
This watch has one protruding button, two recessed buttons and one stem.
Buttons:
TR = Top Right button (Near the “2”)
BR = Bottom Right button (Near the “4”)
BL = Bottom Left button (Near the “8”)
TR - This is the protruding button. It is located at the top right of the face, at
the 2 o’clock position. This button, when pressed, will tell you the time.
BR - This is a recessed button at the bottom right of the face
, at the 4 o’clock
position. This is the Setting button. It also turns the hourly chime on and off.
BL - This is a recessed button at the bottom left of the face
, at the 8 o’clock
position. This is the Mode button. It also turns the alarm on and off.
To Set the Analog time
The analog time and the talking time run independently of each other and therefore
need to be set separately.
To set the analog time, pull the stem out (at the 3 o’clock position). There may
be a red battery saver tab that needs to be removed before setting the time.
Turn the stem to the correct time.
Once the correct time is displayed, push the stem back in.
To Set theTalking Features
- This watch has the following talking features:
Talking time, choice of male or female voice, talking alarm with choice of 3
alarm sounds, 12 or 24 hour time. It also has an hourly chime.
TR Button
BR Button
BL Button
