- To change any of these features, use a ball point pen tip or the end of a paperclip
to access the BL (bottom left) recessed button. This is the Mode button.
Press and hold the recessed Mode
button until you hear “Alarm Sound
Setting”
As you continue to press the Mode button, you will scroll through the setting
options in the following order:
o
Alarm sound setting, alarm hour setting, alarm minute setting, time hour
setting, time minute setting, and 12 hour setting.
Scroll through the mode settings to find the function you need to change.
o
Once you reach the function you need to change, use the paperclip tip to
push the BR recessed button repeatedly and find your selection.
o
For example,
to change the time,
push and hold BL to access the mode
settings, and then
push the Mode button 4 times to reach “Time Hour
Setting.” Push the bottom right recessed Setting button to scroll through
to the necessary hour. When you hear a beep, the hour has been set.
Then go back to the mode button. Push and hold it to access Mode,
then push it 5 times to reach “Time Minute Setting.” Go to the BR
recessed Setting button to scroll through to the correct minutes.
To Change Between the Male and Female Voice
Press and hold the TR (top right) button for 5 seconds to put the watch into
sleep mode. You will hear the watch beep when it is in sleep mode.
Press and hold the TR button again to take the watch out of sleep mode.
When the watch comes out of sleep mode, it will have the opposite voice.
Press the TR button again to hear which voice you want. Each time you press
the TR button, it will change voice. Confirm your choice by pressing the BR
button. You may hear Chime Off when you do this. This is OK.
To Hear The Talking Time
Press the protruding TR (top right) button near the 2 o’clock position. The
current time will be spoken.
To Turn the Alarm On or Off
Press
the BL Mode button quickly (without holding it.) You will hear “Alarm
On” or “Alarm Off.” To change this setting (to Off or On,) quickly press the BL
button again. Pressing the Mode button quickly 1 time will tell you if the alarm
is on or off. Pressing it quickly a second time will change that setting.
To Turn the Hourly Chime On or Off
Press the BR Setting button quickly (without holding it.) You will hear “Chime
On” or “Chime Off.” To change this setting (to Off or On,) quickly press the
BR button again. Pressing the Setting button quickly 1 time will tell you if the
chime is on or off. Pressing it quickly a second time will change that setting.
Batteries
-
NOTE: Only a professional, qualified jeweler should change these batteries.
- Watches require one battery for both the talking and analog features,
CR2016
-
Battery life is NOT warranted by LS&S.
