14
5.2
Performing of USB Sync
1.
Place a terminal at an ethernet cradle.
2.
Connect a USB Cable at the rear of an ethernet cradle.
3.
The terminal and PC can be sync each other.
Please refer to Active sync Manual regarding the corresponding content.
5.3
Connection of Wired Ethernet.
1.
Place a terminal at an ethernet cradle.
2.
The Wired Icon is indicated like
in a Task Bar line
3.
Usable LAN Cable is connected to the rear of an ethernet cradle.
4.
If IP is brought after a moment, it is changed to
.
5.
The connection of network is done. You can use the Internet.
6
Using of Scanner
Scanning
1.
Start
Program
Demos
Scan Demo is executed.
2.
Adjust to make laser beam positioned near Bar-cord to be read while pressing a
[SCAN] button.
3.
And touch off the [SCAN] button.
Scan success
-
The read-on Barcode information is outputted from Barcode Type and Barcode Value.
-
The success sound is generated and yellow LED is turned on.
Scan failure
-
The SCAN_Fail is outputted from Barcode Type and Barcode Value.
-
The failure sound is generated and red LED is turned on.
Scan beam focus
-
Right using method: All the Bar-cords should be included inside laser beam.
