LS Industrial Systems XBL-PMEC, User Manual, Page: 17 / 101

Chapter 1 Introduction
1 - 5
1.4.2 PROFICON
PROFICON is software tool dedicated for Pnet I/F module. This is used for configuration,
diagnostics. More detail, refer to ch6. PROFICON.
The following figure is an initial screen of the PROFICON.
[
Figure
1.4.1]
PROFICON initial screen
1.4.3 Check the version
Before using the Pnet I/F module, check the version of the module
(1) Check through the XG5000
This is method reading the communication module information through online connection
If it is under normal interface with the CPU, you can get the information as follows.
a) Execute the XG5000
b) Connect to the CPU through “Connect” on the “Online” menu.
c) In the “System Diagnosis” screen, select “Module Information” by double-clicking the
communication module and pop-up window
d) You can check version of the module.