Page 10 of 12
Network & Password Setup
This menu is access protected.
The factory network settings include a unique MAC address ready for connection to a network with
automatic allocation of IP address (DHCP). If, however, a master reset is performed, the MAC address
will be reset to the factory setting. Only in cases where the MAC address has been manually changed it
is neccessay to re-enter MAC address after maset reset.
If DHCP is not used on the network, the IP address must be entered manually. Contact your network or
IT department for further information.
It is important to press “Save Config” if changes have been made.
Setting
Function
MAC Address
Displays the unique address of the product. If changed it may take a few
minutes before contact to i-MessageAlarm is re-gained, depending on network
settings.
Host Name
Can be changed to desired name on web server. Must be changed in case of
multiple i-MessageAlarms on same network. Avoid special characters and æ,
ø, å.
Enable DHCP
Use automatic IP address allocation. Otherwise applicable values must be
entered in below 5 fields.
IP address
IP address on network without DHCP.
Gateway
IP address on gateway for network without DHCP.
Subnet Mask
Network subnet mask for network without DHCP.
Primary DNS
Primary DNS server for network without DHCP.
Secondary DNS
Secondary DNS server for network without DHCP.
Password
Password / access code for the i-MessageAlarm configuration menus.
