LRX™ FRESNEL
Check for the latest manual updates at www.lrx-lighting.com
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
19
19
TILT, PAN OR FOCUS MOTOR
NOT OPERATING CORRECTLY.
Head moves freely without control:
This may indicate the fixture has received impact and the drive gear has
been damaged or drive may have become disengaged.
Head not moving on one axis but other axis is fine
Test with another hand controller if available. If still unresponsive proceed
to next step.
This may indicate the fixture has received impact and the drive gear has
been damaged or drive may have become disengaged.
Actuate drive function and listen for motor operation. The tilt and pan drive
assemblies use a slip clutch inline between the motor and drive gear as a
protective measure, this clutch will slip and make a clicking sound once
each revolution when driven by the motor, if the clutch has exceeded it
preset limits.
If any of these conditions exist, suspend use of the product and call for
service.
There are no user serviceable parts.
TROLLEY DOESN’T RESPOND
Dangerous voltage present at socket.
Test with LRX hardwired trolley hand controller. If it now works problem
with fixture, hand controller, lighting console.
LAMPS NOT WORKING
TUNGSTEN MODE LAMP NOT WORKING
Check head extension cables and fixture panel mount connector pins
Ensure correct lamp input power is available at head cable.
Check that the lamp lock door is closed and door interlock switch is
operating.
Ensure lamp is OK, disconnect power supplies, remove lamp from
