background image

Warranty

Long Range Systems, LLC permits a one-year manufacturer’s warranty following the original consumer purchase date
of any LRS system. Any individual components or products purchased will receive a 30-day manufacture warranty. This
warranty covers any defects due to faulty material or workmanship, but does not include damage to the product result-
ing from accident, misuse or improper electrical connection. If the product or system should become defective within the
warranty period, we will repair or replace with equivalent equipment, free of charge. We will pay transportation charges
to return your product via standard FedEx Ground shipping, provided the product is shipped prepaid to:

Long Range Systems, LLC

4550 Excel Pkwy, Suite 200

Addison, TX 75001

No return or replacement can be received without prior authorization from the LRS Customer Support department or with-
out the proper RMA# posted on the outside of the shipping container. Contact Customer Support at 800.437.4996 or
www.pager.net. This warranty gives you specific legal rights and you may also have rights that vary by state.

Copyright © 2013, Long Range Systems, LLC  All Rights Reserved

This manual contains proprietary information of Long Range Systems, LLC (LRS) and is intended for use only by its em-
ployees or customers.  None of the material contained herein may be copied, reproduced, republished, downloaded, dis-
played,  posted,  or  transmitted  in  any  form  or  by  any  means,  including  but  not  limited  to,  electronic,  mechanical,
photocopying, recording, or otherwise without the prior written permission of LRS.  Additional copies of this manual may
be obtained by contacting LRS.

Screen displays, keyboard layouts, hardware descriptions, or software are proprietary to LRS and are subject to copy-
right and other intellectual property rights of LRS and shall be treated in accordance with the previous paragraph.

All attempts have been made to make the information in this document complete and accurate.  LRS is not responsible
for any direct or indirect damages or loss of business resulting from inaccuracies or omissions.  Specifications and other
information contained within this document are subject to change without notice.

Long Range Systems, LLC reserves the right to make changes without further notice to any products herein. LRS, LLC
makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor
does LRS, LLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims
any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be
provided in LRS, LLC data sheets and/or specifications can and do vary in different applications and actual performance
may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by
customer’s technical experts. LRS, LLC products are not designed, intended, or authorized for use as components in sys-
tems intended to support or sustain life, or for any other application in which the failure of the LRS, LLC product could
create a situation where personal injury or death may occur. Should Buyer purchase or use LRS, LLC products for any
such unintended or unauthorized application, Buyer shall indemnify and hold LRS, LLC and its officers, employees, sub-
sidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney
fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unau-
thorized use, even if such claim alleges that LRS, LLC was negligent regarding the design or manufacture of the part, de-
vice or system.

EU DECLARATION OF CONFORMITY

We, Long Range Systems hereby declare under our sole responsibility that the T9550 LCK paging transmitters and on-
site pagers comply with the essential requirements in the European RE&TTE Directive 1999/5/EC of the European Par-
liament of the Council of 9 March 1999 on radio equipment and telecommunication terminal equipment and the mutual
recognition of their conformity.  The following standards were utilized:

ETS 300 224: 1998

EN 301 489-2: 2002

EN61000-3-2: 1998

EN 61000-3-3: 1995

EN 60950: 1992 with A1, A2, & A3.

Long Range Systems

11

T9550 LCK User Manual

XU-0008 061113

Summary of Contents for T9550 LCK













Reviews: