Secondary Paging
The Secondary Paging feature, when enabled, will send a message to a second pager after the third repage
cycle. This feature is useful if you want a backup person to respond to a customer’s request if the first per-
son does not.
Example:
Set Message to “Aisle”, and Butler ID to “15”. During repage, the main pager will display
“Aisle 15”. After the third repage, the secondary pager will display “Aisle 15”.
To set Seconday Paging:
1. Enable and set Repaging (see p. 8).
2. Under Secondary Page, click on the Enabled check box to enable or disable (a check mark indicates
secondary page is enabled).
3. From the
PAGER
drop down box, select the pager number that will receive the secondary page.
Note:
If the Repage (p. 8) feature is enabled, the transmitter will repage the main pager at pre-set intervals until
the page is cleared. (See Stop Re-paging, p. 8 for instructions on clearing the page).
Cancel Message
Note:
Secondary Paging must be enabled (see p. 7).
This feature will enable or disable sending a preset cancel message to pagers when a magnet resets the But-
ton Butler.
Example:
IF:
1. Butler ID is set to “15”
2. Cancel message is set to “Cancel”
3. Butler is set to send message “Aisle” to the main pager
4. “Service” button on Butler is pressed
5. Pager displays “Aisle 15”
6. The pager magnet is held over the “Service” button and repaging is stopped (see p. 11)
THEN:
The secondary pager will display “Cancel Aisle 15”.
If the page is stopped/canceled after the Secondary Pager goes off, the Secondary Pager will receive “Can-
cel Aisle 15”. This is useful if using more than one pager, so the second person is notified.
Long Range Systems
6
Button Butler Program Guide
